Tweet
esignal desktop api doesn't seem to be cleaning up after me very well (or maybe i'm not cleaning up correctly)
I execute
intHandle = esignal.RequestHistory(strSymbol, "d", bt, 1, -1, -1)
and receive the symbol data ok for most companies that are active. Some companies, however, don't return results and I end up time out the request after 2 minutes. To "Time out" the request I have my timer wait 2 minutes and execute this on requests still pending:
esignal.releasehistory(inthandle)
and a set the executing class to nothing.
I do the same for requests that come back with a response. This works fine for those requests but "Timed out" requests don't get cleared out of the desktop API's memory. I can tell it's not clearing based on the "Sym ###" count on the bottom status bar. This eventually results in getting an error saying i'm requesting too many symbols (because it still thinks the old requests are valid) and crash the application (do to app memory full).
Is there a way I can fire a clean up routine on the desktop API or Force a clean up?
This is a small list of symbols that never returned and that I had to time out. Even though, of course, I will be removing these from further requests, I still need to fix this for the future.
ALYNQ, ALGI, DIT, AMSWA, AOLA, AMTC, AMTC, AMBC, AMTA, ABH, AMPI, AMCE, ANCX, ACBA, AGCC, AII, ANSL, AIP, ARTL, AKIS, HOST, ALGI, ASAM, AMSWA, ASBP, AMTC, ASHE, AMTA, ASKJ, AMPI, ASPC, ANCX, AAME, AGCC, ATBC, ANSL, ALFC, ARTL, ANK, HOST, APCFY, ASAM, AUBN, ASBP, CFFI, ASHE, CAND, ASKJ, RKE, ASPC, CASS, AAME, CALA, ATBC, CCB, ALFC, CCFH, ANK, CGS, APCFY, CDSW, AUBN, CEBK, CFFI, GCFC, CAND, CIMT, RKE, CKFB, CASS, CLAS, CALA, CLSR, CCB, CNBF, CCFH, CCNE, CGS, ECC, CDSW, ESBK, CEBK, ENO, GCFC, ELAB, CIMT, ENT, CKFB, EQUI, CLAS, RCG, CLSR, FBSS, CNBF, FSCR, CCNE, FFDF, ECC, FFLC, ESBK, FWHT, ENO, FAVS, ELAB, FBSI, ENT, FCAP, EQUI, FCCO, RCG, FFBI, FBSS, FIFS, FSCR, FKFS, FFDF, FMSB, FNFI, FFLC, FWV, FWHT, FBMI, FAVS, FFDB, FBSI, FMCO, FCAP, FNBF
I execute
intHandle = esignal.RequestHistory(strSymbol, "d", bt, 1, -1, -1)
and receive the symbol data ok for most companies that are active. Some companies, however, don't return results and I end up time out the request after 2 minutes. To "Time out" the request I have my timer wait 2 minutes and execute this on requests still pending:
esignal.releasehistory(inthandle)
and a set the executing class to nothing.
I do the same for requests that come back with a response. This works fine for those requests but "Timed out" requests don't get cleared out of the desktop API's memory. I can tell it's not clearing based on the "Sym ###" count on the bottom status bar. This eventually results in getting an error saying i'm requesting too many symbols (because it still thinks the old requests are valid) and crash the application (do to app memory full).
Is there a way I can fire a clean up routine on the desktop API or Force a clean up?
This is a small list of symbols that never returned and that I had to time out. Even though, of course, I will be removing these from further requests, I still need to fix this for the future.
ALYNQ, ALGI, DIT, AMSWA, AOLA, AMTC, AMTC, AMBC, AMTA, ABH, AMPI, AMCE, ANCX, ACBA, AGCC, AII, ANSL, AIP, ARTL, AKIS, HOST, ALGI, ASAM, AMSWA, ASBP, AMTC, ASHE, AMTA, ASKJ, AMPI, ASPC, ANCX, AAME, AGCC, ATBC, ANSL, ALFC, ARTL, ANK, HOST, APCFY, ASAM, AUBN, ASBP, CFFI, ASHE, CAND, ASKJ, RKE, ASPC, CASS, AAME, CALA, ATBC, CCB, ALFC, CCFH, ANK, CGS, APCFY, CDSW, AUBN, CEBK, CFFI, GCFC, CAND, CIMT, RKE, CKFB, CASS, CLAS, CALA, CLSR, CCB, CNBF, CCFH, CCNE, CGS, ECC, CDSW, ESBK, CEBK, ENO, GCFC, ELAB, CIMT, ENT, CKFB, EQUI, CLAS, RCG, CLSR, FBSS, CNBF, FSCR, CCNE, FFDF, ECC, FFLC, ESBK, FWHT, ENO, FAVS, ELAB, FBSI, ENT, FCAP, EQUI, FCCO, RCG, FFBI, FBSS, FIFS, FSCR, FKFS, FFDF, FMSB, FNFI, FFLC, FWV, FWHT, FBMI, FAVS, FFDB, FBSI, FMCO, FCAP, FNBF
Comment