How do I make this EFS auto update ?

[larrydudash]

How do I add efs code ?

[larrydudash]

How do I make this EFS auto update ?

delete

[larrydudash]

How do I make CustomEnvelope auto update ?

How do I make "CustumEnvelope.efs" auto Update on the 30 Minute Chart ?
This is my 3rd and final try.

[ACM]

Re: How do I make CustomEnvelope auto update ?

larrydudash
What do you mean with auto update?
Alex

Originally posted by larrydudash
How do I make "CustumEnvelope.efs" auto Update on the 30 Minute Chart ?
This is my 3rd and final try.

[larrydudash]

Re: Re: How do I make CustomEnvelope auto update ?

Alexis
I have two CustomEnvelpes on my study.
(1) The one with a 3 MA Env with -1 Offset updated fine on
my 30 minute chart.
(2) But the second with a 10 MA Env -5 Offset does NOT update
on my 30 minute chart unless I use the "refresh"
(3) See chart below.

Originally posted by Alexis C. Montenegro
larrydudash
What do you mean with auto update?
Alex

http://share.esignal.com/ContentRoot/HAL/SPX_30.png

[ACM]

Re: Re: Re: How do I make CustomEnvelope auto update ?

larrydudash
Replace the following three lines of code

 xUpEnv =  offsetSeries(upperEnv(Length, eval(Type), Percent, eval(Source)(sym(vSymbol))),Offset);
        xMidEnv =  offsetSeries(middleEnv(Length, eval(Type), Percent, eval(Source)(sym(vSymbol))),Offset);
        xLoEnv =  offsetSeries(lowerEnv(Length, eval(Type), Percent, eval(Source)(sym(vSymbol))),Offset); 

with the following

xUpEnv =  upperEnv(Length, eval(Type), Percent, eval(Source)(sym(vSymbol)));
        xMidEnv =  middleEnv(Length, eval(Type), Percent, eval(Source)(sym(vSymbol)));
        xLoEnv =  lowerEnv(Length, eval(Type), Percent, eval(Source)(sym(vSymbol))); 

and replace the return statement

return new Array (getSeries(xUpEnv), getSeries(xMidEnv), getSeries(xLoEnv)); 

with the following

 return new Array (offsetSeries(xUpEnv,Offset), offsetSeries(xMidEnv,Offset), offsetSeries(xLoEnv,Offset)); 

Once you implement these changes the script should update also when using negative offsets
Alex

Originally posted by larrydudash
Alexis
I have two CustomEnvelpes on my study.
(1) The one with a 3 MA Env with -1 Offset updated fine on
my 30 minute chart.
(2) But the second with a 10 MA Env -5 Offset does NOT update
on my 30 minute chart unless I use the "refresh"
(3) See chart below.
http://share.esignal.com/ContentRoot/HAL/SPX_30.png

[larrydudash]

Re: Re: Re: Re: How do I make CustomEnvelope auto update ?

Alexis
(1) I made the 2 changes, but will not know until after the market opens
(2) For your info....The neg Offsets are required for study of the
HURST Method. Many books have been written on HURST METHOD.
.

Originally posted by Alexis C. Montenegro
larrydudash
Replace the following three lines of code

 xUpEnv =  offsetSeries(upperEnv(Length, eval(Type), Percent, eval(Source)(sym(vSymbol))),Offset);
        xMidEnv =  offsetSeries(middleEnv(Length, eval(Type), Percent, eval(Source)(sym(vSymbol))),Offset);
        xLoEnv =  offsetSeries(lowerEnv(Length, eval(Type), Percent, eval(Source)(sym(vSymbol))),Offset); 

with the following

xUpEnv =  upperEnv(Length, eval(Type), Percent, eval(Source)(sym(vSymbol)));
        xMidEnv =  middleEnv(Length, eval(Type), Percent, eval(Source)(sym(vSymbol)));
        xLoEnv =  lowerEnv(Length, eval(Type), Percent, eval(Source)(sym(vSymbol))); 

and replace the return statement

return new Array (getSeries(xUpEnv), getSeries(xMidEnv), getSeries(xLoEnv)); 

with the following

 return new Array (offsetSeries(xUpEnv,Offset), offsetSeries(xMidEnv,Offset), offsetSeries(xLoEnv,Offset)); 

Once you implement these changes the script should update also when using negative offsets
Alex

[larrydudash]

Re: Re: Re: Re: How do I make CustomEnvelope auto update ?

Alexis
It worked in real time
Thank you again.

Originally posted by Alexis C. Montenegro
larrydudash
Replace the following three lines of code

 xUpEnv =  offsetSeries(upperEnv(Length, eval(Type), Percent, eval(Source)(sym(vSymbol))),Offset);
        xMidEnv =  offsetSeries(middleEnv(Length, eval(Type), Percent, eval(Source)(sym(vSymbol))),Offset);
        xLoEnv =  offsetSeries(lowerEnv(Length, eval(Type), Percent, eval(Source)(sym(vSymbol))),Offset); 

with the following

xUpEnv =  upperEnv(Length, eval(Type), Percent, eval(Source)(sym(vSymbol)));
        xMidEnv =  middleEnv(Length, eval(Type), Percent, eval(Source)(sym(vSymbol)));
        xLoEnv =  lowerEnv(Length, eval(Type), Percent, eval(Source)(sym(vSymbol))); 

and replace the return statement

return new Array (getSeries(xUpEnv), getSeries(xMidEnv), getSeries(xLoEnv)); 

with the following

 return new Array (offsetSeries(xUpEnv,Offset), offsetSeries(xMidEnv,Offset), offsetSeries(xLoEnv,Offset)); 

Once you implement these changes the script should update also when using negative offsets
Alex

[ACM]

Larry
You are welcome
Alex

Originally posted by larrydudash
Alexis
It worked in real time
Thank you again.