In tScript Editor" right click pop-up window there is no "Paste" feature

[waynecd]

There is "Copy" and "Cut", just no "Paste".

Wayne

[ACM]

Re: In tScript Editor" right click pop-up window there is no "Paste" feature

waynecd
Paste is available [when applicable]
Alex

Originally posted by waynecd
There is "Copy" and "Cut", just no "Paste".

Wayne

[waynecd]

Alex,

In version: 11.2.2359.1117 64-bit (up to date),
it doesn't have the -Paste- feature under any
event (i.e., after cut/copy within the script or from outside
source like NotePad).

This only happens within the script, it works fine if in the "Find/Replace" subwindow.

Unless I have a bad install. Is your example from a 32-bit version?

Wayne

[waynecd]

Alex,

Since you are seldom wrong, I reinstalled the software and now it works fine.

Thanks.

Wayne

[waynecd]

It Happened again

Well,

It happened again, with the 64 bit version.

I copied a segment of text from one Script Editor window to another and the "Paste" command did not appear, same as first post.

I then shut eSignal ver 11.2.2359.1117 and restarted it again and it worked.

I had run it continuously for about 8 hours with 6 pages and two charts in each page when I tried to Paste, so maybe after running for a while, the pop-up window with the "Paste" command stops working and the window with only the "Copy", etc commands takes it's place, or eSignal no longer recognizes that there is data in the clipboard.

Wayne

[waynecd]

FWIW,

This still happens in the latest release:
eSignal version 11.2.2399.1183 64-bit (up to date)

Wayne

[waynecd]

ver 11.3.2455.709 64-bit still has this problem.

The paste function sometimes doesn't work in the Script Editor.

see flash video at:

http://share.esignal.com/download.jsp?groupid=1135&folder=&file=Paste Disabled.flv

Sorry for the poor quality of the video, I had to reduce the size to meet the upload size limit. I will gladly send the 16 MB zip file of the *.avi file.

Wayne