change bands

[InvGrp2]

I've attached a study that creates bands based upon a MA. I'd like to add this study 2x to the chart and have one set at 10 and the other set at 5 (bands). When I go to edit the 2nd study it won't allow me to change the study from 10 to 5.

Any help would be appreciated.

Bruce

P.S. I use it on the YM H7 (I did on the NQ and it worked fine).

[InvGrp2]

I just realized I could copy the study and do the corrections in the copy versus changing via edit study (it wouldn't work in the edit studies).

Thanks.

Bruce

[ACM]

Bruce
The reason why you could not set the Bands to 5 Points through Edit Studies is because you set a Lower Limit of 10 in the Points parameter (see line 63 in the following screenshot)



Replace that value with 0 (or any other value that you want to set as the Lower Limit) then after you saved the formula remove it from the chart and re-apply it.
Once you implement this change you will be able to set the Points parameter to 5 or any other value greater than the LowerLimit (see screenshot below showing a chart with two instances of the efs running one with the bands set at 10 points and the other at 5 points)
Alex

[InvGrp2]

Alex.

I'll try that.

As usual thanks again.

Bruce

[ACM]

Bruce
My pleasure as always
Alex